|
LST Radiators harbour dirt. Fact. They provide a warm, undisturbed environment for germs and bacteria to thrive.
Ease of cleaning is essential to enable clean, safe care to be provided in hospitals, care homes, health centres and clinics. Most LST radiators consist of an inaccessible fixed cover and permanently mounted rigid emitter, which are almost impossible to clean behind without expensive professional equipment. This makes routine thorough cleaning almost impossible.
The Trionic DeepClean LST radiator enables thorough cleaning of the casing externally and internally, and even allows cleaning behind the radiator, helping to prevent the spread of infection such as C.Diff and MRSA.
The LST cover is protected with BioCote silver based anti-microbial paint, which inhibits the growth of bacteria on the LST surface, and is clinically proven to reduce bacteria on the LST cover surface by up to 99.9% over 24 hours.
The LST radiator cover incorporates a patented design to enable it to be safely and quickly opened to provide instant access for cleaning inside the unit. A wide variety of fittings can be provided to enable tool-less access or high security locks, dependent upon the environment.
The access door can be lowered and stood on when cleaning or lifted out where this is not practical. In a development from the Clean-Line model, the top rail has been removed to give full access to the top of the radiator and the unit have be re-designed to produce a far sturdier and stronger design.
The radiator valves are fitted with Easi-Rad fittings to enable the radiator to be quickly and safely lowered for cleaning the back of the radiator and the wall behind it. The patented design of the Easi-Rad fittings enables it be be used in both new installations and retrofitted to existing panel radiators.
Trionic DeepClean LST radiators are available in a wide range of sizes and configurations with outputs of up to 3334 watts (Delta T60). It can be used on both two pipe and single pipe systems (subject of change of fittings).
Casings are manufactured from 1.5mm mild steel and are strong, rigid and robust. They have safe fully radiused corners, and are of a slim-line design with a one-piece construction which does not require assembly. Cut outs for pipework, skirtings, etc can be programmed in during manufacture to eliminate site cutting.
Casings have a flat top as standard, but sloping top casings can be supplied upon request.
As well as the standard options, the Trionic DeepClean LST radiator can be fitted with anti-ligature mesh and valve shrouds for use in mental health premises. |
